Designers & Architects
Pisos Cálidos is a total heating solution for residential and commercial projects. Several prominent reasons why architects and HVAC engineers rely on specifying Warm Floors are:
- There is no need to add mechanical space in the building.
- With a thickness of 1/16 inch, no ground level rise and lightweight.
- Produces 51 BTU at 15 watts, 100% Heat Conversion.
- Simple installation, adaptable, on-site modifications, adapts to structural elements, cabinets and doors.
- Designed to operate at 85 degrees, it can be adjusted to operate at a lower temperature if necessary.
- Available in 120/240 volts and 50/60 MHz
- Product electrical zones, controlled by dual sensor in-line thermostats (floor and ambient), require a dedicated 15 amp, 120 volt service for 100 sq. ft. and 240 volt service for 200 sq. ft.
- In many area heating solutions, auxiliary or primary heating.
- Uniform heat over the entire surface, no heat/cold expansion problems.
- No hot spots, ‘self-regulating’ uses PTC-Nano technology, as the surface reaches temperature, the resistance in the carbon material increases, reducing power consumption, with two direct benefits: reducing power consumption from 15 watts to 10 watts per square foot.
- Silent, solid state.
- Maintenance free.
- Non-allergenic.
- Waterproof.
- It installs in a fraction of the time of alternative systems and at a fraction of the cost.
- Works well with common adhesives.
- Low EMF: 1,000 times less than OSHA standards.
- Rugged, with no wires or pipes to break, it withstands construction traffic, even if floor covering is delayed.
- Greater comfort at lower temperatures, warmer on the floor than on the ceiling.
- It heats both by resistance, warm to the touch, and by far infrared (FAR-Infrared), which heats objects in the room.
- Easily zoned (150 sq. ft. per zone at 240 volts, 75 sq. ft. at 120 volts).
- In-line controllers, adjust surface temperature and/or ambient settings.
- Many controller options, programmable, non-programmable, WiFi/smart device connection.
- Lifetime warranty to the original owner.
- ETL certified according to UL-1693 standards.
- A proven track record, in service since 1992.
- Superior design and technical support for installation arrangements.
- Indoor and outdoor applications to prevent icing.
- Preferred applications for melting ice on roofs and surfaces.
- U.S. Green Building Certification/LEEDS.
- It is installed over all subfloor applications, such as concrete, wood and composites.
- Compatible with all types of flooring, wood (nail down and engineered wood installation), luxury vinyl tile, ceramic and stone (see installation manual for details).